"71" Camaro Restomod Exhaust Clamp/Clearance Fix! 4-6-2021

Replacing about half of the stepped clamps on the exhaust. They do not provide enough clamping force to prevent the connection points from rotating. The non-stepped Walker stainless clamps are much more robust and cover the expansion slots by about a 1/8" so the clamping area is applied at the correct location without deforming the metal. This should allow a much easier disassembly if I ever need to get the exhaust back apart. The stepped clamps that I'm replacing are made by TorcTite EasySeal. They work okay if you're connection points are not susceptible to rotational forces. If you need to prevent rotation these are not a good choice!