Kelbly Atlas Tactical Actions

The Atlas Tactical action is a Remington semi-clone action, featuring a side bolt release and trigger hanger. There is little modification necessary to use a Remington 700/40x stock or chassis.

We made the most rugged action possible for practical, tactical, or hunting. We use a Black Nitride finish from H&M Metal Processing. This allows you to use this action “dry” or without lubrication for extreme environments. As always it is best to use lubrication in normal day to day shooting. In addition to the Black Nitride process we use a fluted bolt, to help move dirt into the flutes allowing better function of the action.

We cut the magazine well to use the Accuracy International single stack magazines. One of the key features of this action is the TG ejector, it is a mechanical ejector that does not put any chamber pressure on the round. It is also a “never fail” setup, meaning that there are no springs to get gummed up and stop working.

Kelbly offers an Extreme Duty Bolt Stop, that bolts to the side of the action via a 6/48 screw. It is truly the most reliable bolt stop upgrade on the market!

We finish it all off with a pinned 20 MOA Picatinny 1913 MIL-SPEC rail, a dual pin recoil lug, and a tactical bolt knob.
Specifications:

Short Action:
Weight: 29.5 oz.
Length: 7.860 in.
Diameter: 1.355 in.
Bolt Faces: .223, .308, Mag (.532)
Bolt Head: Coned, Flat
Right Bolt – Right Port OR Left Bolt – Left Port ONLY
Head-Space: .692 in.

Long Action:

Weight: 33 oz.
Length: 8.7100 in.
Diameter: 1.355 in.
Bolt Faces: 308, Mag. (.532)
Bolt Head: Flat
Bolt: Left, Right
Port: Left, Right
Head-Space: .692 in.

#kelblyatlas #700action #longrangeshooting